Majlis and guest room TV setup that guests can use

Updated 2026-11-15 · 4 min read

A majlis or guest room is often the largest room in the house and the furthest from the router. The screen is big, the seating is far from it, and the people using the remote may be guests who have never seen your setup. A few decisions at the start make the evening calm for everyone. This guide covers placement, long cable runs, Wi-Fi reach, a simple remote setup and one habit that keeps things steady.

Step 1: Decide where the streaming device lives

The device does not have to sit behind the screen. Choose the spot by three questions: is there power, is it out of the sun, and can the remote reach it.

Use a wall adapter for power, not the TV's USB port, because a steady supply avoids random restarts.

Step 2: Long HDMI runs

In a majlis the device is sometimes at one end of the room and the screen at the other, or the screen is mounted on a far wall. Plain HDMI cables lose signal over distance, and the symptom is a flickering picture, sparkles, or a black screen.

If you plug a small stick directly into the screen, an extender cable can move it away from the heat and improve the Wi-Fi signal at the same time.

Step 3: Wi-Fi reach or a cable

A majlis is often an extension, a separate wing, or a room with thick walls. The router in the hall may give a weak signal there. Check this on the device itself: run a speed test next to the screen, not next to the router.

For a shared household we suggest 30 Mbps minimum at the screen, and 50 Mbps or more is good, because the family uses the connection at the same time.

If the signal is weak:

  1. Use an Ethernet cable if you can run one. It is the steadiest option for a large screen that people watch for hours. A box with an Ethernet port, or a small adapter, makes this easy.
  2. Add a mesh point in or near the room. Our villa Wi-Fi and mesh guide explains where to place it.
  3. Use the 5 GHz band on the device if it is close to the router. It is faster at short range, but weaker through walls.

Step 4: Keep the remote simple

Guests do not know your device. The fewer buttons they need, the better.

Step 5: The restart habit

Before guests arrive, restart the device and the router. A fresh start clears the small faults that build up over days, and it takes two minutes. After you change anything in the app, close it completely and open it again. Our guide on restarting the app after changes shows the steps.

Which app to use

For Android TV, Fire Stick and Android boxes we use NewTV Player. For Samsung, LG and Hisense screens we use Hot IPTV. Install it from the store on the screen itself, open it, and send us a photo of the screen with the App ID and key. We load your lists from our side, so guests never see a setup screen.

Common problems

The picture flickers or has sparkles

Change the HDMI cable, and try a shorter run or a cable made for length.

It buffers only in the evening

Many people are online at that time. Check the speed at the screen and think about an Ethernet cable or a mesh point.

Frequently asked questions

Can I use a projector in the majlis instead of a screen?

Yes. Our projector guide covers connection, sound and heat.

Can two rooms watch at the same time?

One subscription is used on one screen at a time. Message us if you want both rooms together and we explain the options.

When to contact us

Message us on WhatsApp with the screen brand, the device and a photo of the screen, and we tell you what to change. Nothing is paid on this website, and you can write to us on WhatsApp to start a free 1-day trial in the room where your guests will watch.

Try it free for 1 day

Message us on WhatsApp and we set everything up for you.

Start free trial on WhatsApp

Keep reading

WhatsApp us